word ! as far as i know ntx have stock atx engineuporabnik007 napisal/-a:you cant have ctx engine with 50cc cilinder.2pac napisal/-a:i know thats the problem
i have a ctx engine with a 50cc cilinder
becouse in the right side i have circle in my carter
and the normal ntx did have a squere
Im form the Netherlands and this are my mopeds
Re: Im form the Netherlands and this are my mopeds
Re: Im form the Netherlands and this are my mopeds
and here everybody drives a standard a3
because the most a3 drive 25 and than you dont have to wear a helmet
Most sellings in the netherlands a year
-standard a3 25km 40000 sells a year
-standard a3 45km 4000
-streetmate 21
-revival 200
--youngster 400
-funtastic 700
-sporter 15
yes realy i can make pictures
because the most a3 drive 25 and than you dont have to wear a helmet
Most sellings in the netherlands a year
-standard a3 25km 40000 sells a year
-standard a3 45km 4000
-streetmate 21
-revival 200
--youngster 400
-funtastic 700
-sporter 15
yes realy i can make pictures
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
- automatic_7
- Moderator
- Prispevkov: 5236
- Pridružen: Če Avg 13, 2009 2:07 pm
- Kraj: okolica Nove Gorice
Re: Im form the Netherlands and this are my mopeds
the same is here in SLO
if your moped go 25km/h
you dont need nothing (only old 12 years)
if your moped go 25km/h
you dont need nothing (only old 12 years)
Re: Im form the Netherlands and this are my mopeds
realy
Here you have to be 16
and a theory exame 35 euro
i am luck in 2010 you have to do theory and practice 450 euro
25 and 45 km
Here you have to be 16
and a theory exame 35 euro
i am luck in 2010 you have to do theory and practice 450 euro
25 and 45 km
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
Re: Im form the Netherlands and this are my mopeds
look
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
Re: Im form the Netherlands and this are my mopeds
Look, you have standard 50cc machine, ctx machine is similar like 50cc on the out side, but it is diffrent inside.
ATX50 machine:smaller cilinder(50cc) ,carburator(bing 14/18) and smaler crankshaft, piston in original machine is fi38mm
CTX80 machine:bigger cilinder(80cc),carburator(bing21), bigger crankshaft,piston in original machine is fi46mm
I hope you see the diffrence now...
ATX50 machine:smaller cilinder(50cc) ,carburator(bing 14/18) and smaler crankshaft, piston in original machine is fi38mm
CTX80 machine:bigger cilinder(80cc),carburator(bing21), bigger crankshaft,piston in original machine is fi46mm
I hope you see the diffrence now...
Re: Im form the Netherlands and this are my mopeds
Yes i know thnx for the info
Do you know how i can get to run my NtX 80Km/h with 50cc
I was thinking about
-Short the piston
-The intake of the cilinder bigger
-And the exhaust of the cilinder bigger
-15mm carburater power filter and 15mm intake
-other exhaust shock
Do you know how i can get to run my NtX 80Km/h with 50cc
I was thinking about
-Short the piston
-The intake of the cilinder bigger
-And the exhaust of the cilinder bigger
-15mm carburater power filter and 15mm intake
-other exhaust shock
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
Re: Im form the Netherlands and this are my mopeds
Pipe homoet P4, carburetor 18-19, a little ported exshaust port, 1,5 mm lower head and bigger front sprocket. piston must be 46 mm long from edge where dome begins to end of the tail.
Verjamem v enega boga, Koprskega Tomosa
- automatic_7
- Moderator
- Prispevkov: 5236
- Pridružen: Če Avg 13, 2009 2:07 pm
- Kraj: okolica Nove Gorice
Re: Im form the Netherlands and this are my mopeds
BT cilinder if you can find it
or kit for puch
or kit for puch
- koroman
- predelana mašina
- Prispevkov: 1875
- Pridružen: Po Avg 31, 2009 10:44 pm
- Kraj: zlatoličje - maribor
Re: Im form the Netherlands and this are my mopeds
Or you can buy a BT cylinder here on this forum and with homoet pipe and 18 carb is should run about 85km/h