AT-50....From Holland

People from all over the world can present your mopeds here, or you can ask whatever you want to know about mopeds.
Odgovori
Uporabniški avatar
TomosHolland
kriva felna
Prispevkov: 56
Pridružen: Če Mar 10, 2011 9:42 pm

Re: AT-50....From Holland

Odgovor Napisal/-a TomosHolland »

KVASoooO napisal/-a:Nice moped, get rid of the pedals :D
they are my kickstart and they are comfortable :D

and its old-school , so i want to keep it original
Uporabniški avatar
TomosHolland
kriva felna
Prispevkov: 56
Pridružen: Če Mar 10, 2011 9:42 pm

Re: AT-50....From Holland

Odgovor Napisal/-a TomosHolland »

full setup
ObSLF.jpg
(hopefully tomorrow running with BT cyl ! )
Uporabniški avatar
aljo69
el presidente
Prispevkov: 6818
Pridružen: Po Avg 10, 2009 1:53 pm
Kraj: Celje

Re: AT-50....From Holland

Odgovor Napisal/-a aljo69 »

repaint it :)
Uporabniški avatar
TomosHolland
kriva felna
Prispevkov: 56
Pridružen: Če Mar 10, 2011 9:42 pm

Re: AT-50....From Holland

Odgovor Napisal/-a TomosHolland »

aljo69 napisal/-a:repaint it :)
yeah i should, but maybe later, i am first going to put it on today.

because in a few weeks i want to let the moped get fully painted (professional) , and i think i will paint cylinder then aswell myself, because thats easy.
Uporabniški avatar
TomosHolland
kriva felna
Prispevkov: 56
Pridružen: Če Mar 10, 2011 9:42 pm

Re: AT-50....From Holland

Odgovor Napisal/-a TomosHolland »

i am not getting it to run smooth :(

ive tried alot of different jets, what jet would you guys recommend to me? (the 19mm Dell'orto with Malossi Foamfilter, and fast exhaust)

but before i try more i am going to get a new piston and set the ignition on time (what ignition time do i need with this setup ??) and new sparkplug (which heat-grade?)
Uporabniški avatar
koroman
predelana mašina
Prispevkov: 1875
Pridružen: Po Avg 31, 2009 10:44 pm
Kraj: zlatoličje - maribor

Re: AT-50....From Holland

Odgovor Napisal/-a koroman »

0,8 pre-ignition. jet around 90. it's hard to say exactly
The science of tuning.

viewtopic.php?f=14&t=15145
Uporabniški avatar
TomosHolland
kriva felna
Prispevkov: 56
Pridružen: Če Mar 10, 2011 9:42 pm

Re: AT-50....From Holland

Odgovor Napisal/-a TomosHolland »

koroman napisal/-a:0,8 pre-ignition. jet around 90. it's hard to say exactly
0.8?

what is the standard pre-ignition for AT/NTX/ATX ?
and a friend of mine had 1mm.

and ive tried jet 86/94/98 all are not smooth, i will try more after ignition and heat-grade 8 sparkplug
Uporabniški avatar
aljo69
el presidente
Prispevkov: 6818
Pridružen: Po Avg 10, 2009 1:53 pm
Kraj: Celje

Re: AT-50....From Holland

Odgovor Napisal/-a aljo69 »

TomosHolland napisal/-a:
koroman napisal/-a:0,8 pre-ignition. jet around 90. it's hard to say exactly
0.8?

what is the standard pre-ignition for AT/NTX/ATX ?
and a friend of mine had 1mm.

and ive tried jet 86/94/98 all are not smooth, i will try more after ignition and heat-grade 8 sparkplug
atx has 1.5 mm bt has 0.8mm pre-ignition.. have you tried to raise needle on you carb ?
Uporabniški avatar
pomartin
Mojster
Prispevkov: 2821
Pridružen: Pe Maj 07, 2010 11:45 pm
Kraj: Postojna

Re: AT-50....From Holland

Odgovor Napisal/-a pomartin »

and try different "positions" of mixture screw too
bol star bol nor!
Uporabniški avatar
TomosHolland
kriva felna
Prispevkov: 56
Pridružen: Če Mar 10, 2011 9:42 pm

Re: AT-50....From Holland

Odgovor Napisal/-a TomosHolland »

i will try gasneedle yeah, its the first time i have PHBG carb (always SHA) so its a bit of a puzzle,

but i will try ignition first, and then carb setting, i will update when i know something.
Odgovori