Manual Shifting Engine

People from all over the world can present your mopeds here, or you can ask whatever you want to know about mopeds.
Uporabniški avatar
MichielWolthaus
batzajla
Prispevkov: 35
Pridružen: Po Feb 28, 2011 4:48 pm
Kraj: Brakel, The Netherlands

Manual Shifting Engine

Odgovor Napisal/-a MichielWolthaus »

Hello,

First: I'm sorry for not talking slovenian, but I'm from Holland so I don't talk Slovenian :geek:
Second: I will probably post this in the wrong section of the forum, if so can someone place is at the good section

Because Slovenia the land of Tomos, I tought there would be a bit more knowledge here about Tomos.

My question:

Is the motor mount of an A3/A35 engine the same as the motor mount of a 4L engine(or other manual shifting Tomos engines)?
What kind of modifications must be made to fit an Manual engine on an A3?
Because if I can find an manual engine cheap, then I want to fit one into my A3

Thanks in advance!
apn6s freek
auspuh
Prispevkov: 786
Pridružen: Pe Jun 25, 2010 3:12 pm

Re: Manual Shifting Engine

Odgovor Napisal/-a apn6s freek »

a3 engine is automatic shifting
automatic:
-a3
-a35
-targa
.
.
.

manual:
-apn4
-apn6
-15slc
-bt
-atx
... 50 ccm

-e90.........90ccm
-ctx..........80ccm

it is more of those engines but i dont remember names of all

sorry my bad anglesch iss not good

:oops: :oops: :oops: :mrgreen:
če bi bili skuterji zanesljivi bi jih tudi poštarji imeli ;)
Uporabniški avatar
MichielWolthaus
batzajla
Prispevkov: 35
Pridružen: Po Feb 28, 2011 4:48 pm
Kraj: Brakel, The Netherlands

Re: Manual Shifting Engine

Odgovor Napisal/-a MichielWolthaus »

It's must be an 50cc engine (bigger engines are not allowed in the netherlands)

Do you also know what kind of modifications must be made to fit an manual engine into an A3?
And if the motormount is the same?
Uporabniški avatar
pomartin
Mojster
Prispevkov: 2821
Pridružen: Pe Maj 07, 2010 11:45 pm
Kraj: Postojna

Re: Manual Shifting Engine

Odgovor Napisal/-a pomartin »

you have to make the "carriers" of the engine shorter. the two of them fits automaticly, for the third one you will have to do adapter (two metal plates with holes for screw on each side of them)
bol star bol nor!
Uporabniški avatar
MichielWolthaus
batzajla
Prispevkov: 35
Pridružen: Po Feb 28, 2011 4:48 pm
Kraj: Brakel, The Netherlands

Re: Manual Shifting Engine

Odgovor Napisal/-a MichielWolthaus »

Can you send me a photo?
That would make it easier to understand ;)
Uporabniški avatar
pomartin
Mojster
Prispevkov: 2821
Pridružen: Pe Maj 07, 2010 11:45 pm
Kraj: Postojna

Re: Manual Shifting Engine

Odgovor Napisal/-a pomartin »

sory, but i do not have any...
bol star bol nor!
Uporabniški avatar
automatic_7
Moderator
Prispevkov: 5218
Pridružen: Če Avg 13, 2009 2:07 pm
Kraj: okolica Nove Gorice

Re: Manual Shifting Engine

Odgovor Napisal/-a automatic_7 »

Uporabniški avatar
MichielWolthaus
batzajla
Prispevkov: 35
Pridružen: Po Feb 28, 2011 4:48 pm
Kraj: Brakel, The Netherlands

Re: Manual Shifting Engine

Odgovor Napisal/-a MichielWolthaus »

I've seen the video, but if you can make an photo of that motormount and how the carburetor is placed and how the exhaust is placed. That would be nice
Uporabniški avatar
pomartin
Mojster
Prispevkov: 2821
Pridružen: Pe Maj 07, 2010 11:45 pm
Kraj: Postojna

Re: Manual Shifting Engine

Odgovor Napisal/-a pomartin »

i guess you will have to make custom "knee" for exhaust and carburetor... or at least fix the "carrier" of exhaust
bol star bol nor!
Uporabniški avatar
MichielWolthaus
batzajla
Prispevkov: 35
Pridružen: Po Feb 28, 2011 4:48 pm
Kraj: Brakel, The Netherlands

Re: Manual Shifting Engine

Odgovor Napisal/-a MichielWolthaus »

That would not be an problem since I work as welder/sheet metal worker in the holidays.
But I want to know how many work it is, and how complicated it is before I start.
Odgovori