Im form the Netherlands and this are my mopeds
-
- auspuh lager
- Prispevkov: 19
- Pridružen: To Jan 04, 2011 5:54 pm
Re: Im form the Netherlands and this are my mopeds
you won't get a good BT cylinder for 30€...
50€ is good 38.5>40.00 cly
70€ is good 38 cly.
one year ago there was cheaper, now they are almost all gone.
50€ is good 38.5>40.00 cly
70€ is good 38 cly.
one year ago there was cheaper, now they are almost all gone.
Re: Im form the Netherlands and this are my mopeds
you think so?uporabnik007 napisal/-a:you won't get a good BT cylinder for 30€...
50€ is good 38.5>40.00 cly
70€ is good 38 cly.
one year ago there was cheaper, now they are almost all gone.
If you know where to look for it, you can get it for a little money, cylinder is not worth so much, for € 50 it must be like new , but as I see everyone sell bad preserved cylinders for a lot of money Ask your friends, ask people for who you know that they were tuning mopeds in the past, and if you have luck, you will get cylinder for beer or. two
Ja vozim E90 jer to je malo jače,
pa onda drugom na zadnji skače,
je da troši malo više,
al devet konja piše!
pa onda drugom na zadnji skače,
je da troši malo više,
al devet konja piše!
Re: Im form the Netherlands and this are my mopeds
yes but they dont sell that cilinders not here and i have no friends in slovenia
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
Re: Im form the Netherlands and this are my mopeds
well, if you want one, just post in subforum "Kupim". here viewforum.php?f=19 . im sure that there will be some one that is willing to send it to nederland via DHL or UPS or maybe some other service, i dont know which is cheaper.
i suggest you that you buy a cylinder with a bore no more than 39.5mm, so in a case that it would need reboring, you can go to 40mm bore and cylinder will be still okay. BT cylinders that have more than 40mm bore are much more likely to overheat. but if the engine is set up very well even with 42mm bore runs good and cool enough. but still, i suggest you to get max 39.5mm.
if you want to get even more from your engine, than you can buy a new "junior" cylinder with 38mm bore, its little harder to get it, but the prices arent that much higher. but people say (ill see soon if its true) that these new junior cylinders need some port optimizing because they arent cast that good, but if you have grinding tool, or know someone that is tuning 2stroke engines, there shouldnt be a problem to optimize it to how it should be.
good luck
i suggest you that you buy a cylinder with a bore no more than 39.5mm, so in a case that it would need reboring, you can go to 40mm bore and cylinder will be still okay. BT cylinders that have more than 40mm bore are much more likely to overheat. but if the engine is set up very well even with 42mm bore runs good and cool enough. but still, i suggest you to get max 39.5mm.
if you want to get even more from your engine, than you can buy a new "junior" cylinder with 38mm bore, its little harder to get it, but the prices arent that much higher. but people say (ill see soon if its true) that these new junior cylinders need some port optimizing because they arent cast that good, but if you have grinding tool, or know someone that is tuning 2stroke engines, there shouldnt be a problem to optimize it to how it should be.
good luck
"It is remarkable how similar the pattern of love is to the pattern of insanity."
- sales0
- vplinjač
- Prispevkov: 466
- Pridružen: Če Maj 27, 2010 9:25 pm
- Kraj: Prekmurje-Murski Petrovci
- Kontakt:
Re: Im form the Netherlands and this are my mopeds
Hello!
This NTX is realy nice moped, but its soo slow!
You need to doo something about it, hee is beging you for more HP.
Im suggesting to you this online store: www.puchshop.de
Here are some good cylinders and not so expensive.
If i have a bt cylinder, i would send it to you, but i dont have it.
How expensive are the shipping kosts from netherland to slowenia?
Kind regards!
Aleš!
This NTX is realy nice moped, but its soo slow!
You need to doo something about it, hee is beging you for more HP.
Im suggesting to you this online store: www.puchshop.de
Here are some good cylinders and not so expensive.
If i have a bt cylinder, i would send it to you, but i dont have it.
How expensive are the shipping kosts from netherland to slowenia?
Kind regards!
Aleš!
Če si zadovoljen z mojimi storitvami povej naprej, če pa nisi zadovoljen pa povej meni.
EMAIL: team.ufo.performance@gmail.com
EMAIL: team.ufo.performance@gmail.com
Re: Im form the Netherlands and this are my mopeds
niti ne tok drago, vem da paleta do 1t Ljubljana-Brno(češka) je 46€ tm okol pr door-to-door
Translate by admin: it ain't that expensive, i know that palet up to 1 t from Ljublana - Brno (CZECH REPUBLIC] is about 46€ by Door-to-door (company)
Translate by admin: it ain't that expensive, i know that palet up to 1 t from Ljublana - Brno (CZECH REPUBLIC] is about 46€ by Door-to-door (company)
vsak vložek v tomosa je napaka..... škoda da bom to napako kmal spet ponovil.
počivaj v miru jani! (janim8)
Re: Im form the Netherlands and this are my mopeds
Rrealy thanx for all the reactions
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
Re: Im form the Netherlands and this are my mopeds
Did every puchcilinder fits
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
Re: Im form the Netherlands and this are my mopeds
puch maxi 100% but you will have to tune your carters2pac napisal/-a:Did every puchcilinder fits
Re: Im form the Netherlands and this are my mopeds
Ahh fuck i dont want to ruine my carters
Here you can see all my mopeds
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F
http://translate.google.nl/translate?hl=nl&sl=sl&tl=nl&u=http%3A%2F%2Fwww.mopedist.si%2F