Stran 7 od 7

Re: AT-50....From Holland

Objavljeno: Ne Jul 03, 2011 3:24 pm
Napisal/-a pomartin
take the longest one and then cut it if neccesery.
i reccomend you to take both 13 and 14, then try both and put on the one you like best ;)

Re: AT-50....From Holland

Objavljeno: Po Jul 04, 2011 5:28 pm
Napisal/-a TomosHolland
allright, ordered 13/33 and some Castrol 2 stroke oil

BUT, i discovered some oil under my moped today, and oil on bottom of the engineblock (reallly black) i dont think its 10w30 because i just refreshed that (blue color) and it cant be black so fast?

so how come so much black oil on block?

(btw one of the cylinderbolts is loose and cant be tightened, so i might have some air escaping, could it be possible oil comes through cylinder)

and cylinderbolt i mean the big ones where cylinder and head slide over ;)

Re: AT-50....From Holland

Objavljeno: Po Jul 04, 2011 8:26 pm
Napisal/-a pomartin
fix it as soon as possible... you can get long screws with m8 on one side and on the other side a "stick" which is just perfect for m7 :D
make m8 in block and that is it :D
or you can get some bear-coil insert or something ;)

Re: AT-50....From Holland

Objavljeno: Pe Mar 30, 2012 11:36 am
Napisal/-a TomosHolland
soooo, long time since update:

new carb (17.5 dellorto)
new manifold
new exhaust (Kreidler Cross Fuego)

http://i.imgur.com/teUYf.jpg

only this exhaust is to slow (not enough revs)

so im looking for a new exhaust for a bt50 setup, id like the same performance as the one from UFO here on the forums,
only that one wasnt built very durable, because it broke at the suspension !

Re: AT-50....From Holland

Objavljeno: Pe Mar 30, 2012 5:47 pm
Napisal/-a KVAS
TomosHolland napisal/-a:soooo, long time since update:

new carb (17.5 dellorto)
new manifold
new exhaust (Kreidler Cross Fuego)

http://i.imgur.com/teUYf.jpg

only this exhaust is to slow (not enough revs)

so im looking for a new exhaust for a bt50 setup, id like the same performance as the one from UFO here on the forums,
only that one wasnt built very durable, because it broke at the suspension !
I dont think you need a new exhaust. First thing that you should do is cut this one to apropriate lenght. Just unbolt the header and then cut it and drive a bit. You should feel the diference.

Re: AT-50....From Holland

Objavljeno: Pe Mar 30, 2012 6:55 pm
Napisal/-a TomosHolland
you mean remove silender and cut the expansion down? or the turn before the exhaustclamp?

and id rather have a solid fitting pipe instead of 2 parts connected with a clamp

Re: AT-50....From Holland

Objavljeno: Pe Mar 30, 2012 10:34 pm
Napisal/-a KVAS
TomosHolland napisal/-a:you mean remove silender and cut the expansion down? or the turn before the exhaustclamp?

and id rather have a solid fitting pipe instead of 2 parts connected with a clamp
You should cut the header in front of chamber, where the clamp is.

Re: AT-50....From Holland

Objavljeno: Ne Apr 01, 2012 7:40 pm
Napisal/-a TomosHolland
hmm ok, will look into that

by the way, do you guys have a portmap of a BT50 cylinder for me?

Re: AT-50....From Holland

Objavljeno: Po Apr 02, 2012 3:04 pm
Napisal/-a pomartin
dsc06370.jpg

Re: AT-50....From Holland

Objavljeno: Po Apr 02, 2012 3:06 pm
Napisal/-a TomosHolland
thanks ! :)