Stran 5 od 8
Re: Im form the Netherlands and this are my mopeds
Objavljeno: Če Jan 06, 2011 11:47 pm
Napisal/-a uporabnik007
you won't get a good BT cylinder for 30€...
50€ is good 38.5>40.00 cly
70€ is good 38 cly.
one year ago there was cheaper, now they are almost all gone.
Re: Im form the Netherlands and this are my mopeds
Objavljeno: Pe Jan 07, 2011 8:57 pm
Napisal/-a filius
uporabnik007 napisal/-a:you won't get a good BT cylinder for 30€...
50€ is good 38.5>40.00 cly
70€ is good 38 cly.
one year ago there was cheaper, now they are almost all gone.
you think so?
If you know where to look for it, you can get it for a little money, cylinder is not worth so much, for € 50 it must be like new , but as I see everyone sell bad preserved cylinders for a lot of money
Ask your friends, ask people for who you know that they were tuning mopeds in the past, and if you have luck, you will get cylinder for beer or. two
Re: Im form the Netherlands and this are my mopeds
Objavljeno: So Jan 08, 2011 11:31 am
Napisal/-a 2pac
yes but they dont sell that cilinders not here and i have no friends in slovenia
Re: Im form the Netherlands and this are my mopeds
Objavljeno: So Jan 08, 2011 12:01 pm
Napisal/-a golnar
well, if you want one, just post in subforum "Kupim". here
viewforum.php?f=19 . im sure that there will be some one that is willing to send it to nederland via DHL or UPS or maybe some other service, i dont know which is cheaper.
i suggest you that you buy a cylinder with a bore no more than 39.5mm, so in a case that it would need reboring, you can go to 40mm bore and cylinder will be still okay. BT cylinders that have more than 40mm bore are much more likely to overheat. but if the engine is set up very well even with 42mm bore runs good and cool enough. but still, i suggest you to get max 39.5mm.
if you want to get even more from your engine, than you can buy a new "junior" cylinder with 38mm bore, its little harder to get it, but the prices arent that much higher. but people say (ill see soon if its true) that these new junior cylinders need some port optimizing because they arent cast that good, but if you have grinding tool, or know someone that is tuning 2stroke engines, there shouldnt be a problem to optimize it to how it should be.
good luck
Re: Im form the Netherlands and this are my mopeds
Objavljeno: So Jan 08, 2011 8:21 pm
Napisal/-a sales0
Hello!
This NTX is realy nice moped, but its soo slow!
You need to doo something about it, hee is beging you for more HP.
Im suggesting to you this online store:
www.puchshop.de
Here are some good cylinders and not so expensive.
If i have a bt cylinder, i would send it to you, but i dont have it.
How expensive are the shipping kosts from netherland to slowenia?
Kind regards!
Aleš!
Re: Im form the Netherlands and this are my mopeds
Objavljeno: So Jan 08, 2011 11:20 pm
Napisal/-a klemenm2
niti ne tok drago, vem da paleta do 1t Ljubljana-Brno(češka) je 46€ tm okol pr door-to-door
Translate by admin: it ain't that expensive, i know that palet up to 1 t from Ljublana - Brno (CZECH REPUBLIC] is about 46€ by Door-to-door (company)
Re: Im form the Netherlands and this are my mopeds
Objavljeno: Ne Jan 09, 2011 1:21 pm
Napisal/-a 2pac
Rrealy thanx for all the reactions
Re: Im form the Netherlands and this are my mopeds
Objavljeno: Ne Jan 09, 2011 1:46 pm
Napisal/-a 2pac
Did every puchcilinder fits
Re: Im form the Netherlands and this are my mopeds
Objavljeno: Ne Jan 09, 2011 2:25 pm
Napisal/-a aljo69
2pac napisal/-a:Did every puchcilinder fits
puch maxi 100% but you will have to tune your carters
Re: Im form the Netherlands and this are my mopeds
Objavljeno: Ne Jan 09, 2011 6:20 pm
Napisal/-a 2pac
Ahh fuck i dont want to ruine my carters